Extrusion Asia Edition 1-2025

41 EXTRUSION & RECYCLING ASIA 1/2025 CHINAPLAS 2025 CENTERWAVE 6000: E cient inline measurement of tubes and pipes The CENTERWAVE 6000 measures non-contact tubes and pipes with diameters from 32 mm to 1,600 mm. The sys - tem provides all measured values immediately after the rst vacuum tank. Thanks to a continuously rotating transceiver and a powerful processor system, diameter and wall thick - ness are precisely measured over 360 degrees of the prod - uct circumference using millimeter wave technology. This facilitates the centering of extrusion tools, minimizes material consumption, reduces costs and increases sustainability. PURITY CONCEPT V: Optical laboratory analysis of plastic pellets In the “Plastics” area, visitors can bring small quantities of opaque and amorphous pellets, akes or test sheets. These will be examined for impurities during the show using the PURITY CONCEPT V inspection and analysis system. The system is suitable for reproducible laboratory applications and detects black and colored impurities down to 50 µm in size, as well as discolorations. “The analysis takes less than a minute, including a test certi cate and HSV color chart of the detected color deviations. Thus, the system contributes to an increased product and quality safety,” says Wanbin Chen, President of SIKORA China. X-RAY 6000 PRO: Optimization in extrusion lines through cost savings With the X-RAY 6000 PRO, SIKORA introduces an inno - vative system based on X-ray technology that continuously provides measured values for wall thickness, eccentricity as well as the inner and outer diameter of hoses, pipes and tubes on extrusion lines. The measuring results are clearly displayed on the monitor of the ECOCONTROL 6000 pro - cessor system. The X-RAY 6000 PRO can be used exibly after the extruder, between two vacuum tanks/cooling sec - tions or at the end of the line for cold measurement. From day one of operation, the system enables precise reduction of the wall thickness to the minimum permissible value – thus ensuring signi cant material and cost savings. SIKORA: Perfection in technology and booth design SIKORA combines technological innovation with an inviting trade fair presence. “Our goal is not only to o er customers rst-class solutions, but also to provide them with an inspiring envi - ronment for professional exchange,” explains Wanbin Chen. The booth invites visitors to linger and experience the technologies. SIKORA AG Bruchweide 2, 28307 Bremen, Germany www.sikora.net Sikora at CHINAPLAS 2025: Booth 10J25 来访者可以在 Chinaplas 现场看到 SIKORA 的 CENTERWAVE 6000，该系统可在挤出过程中精确测量 管材和管道的外径与壁厚。 At Chinaplas, visitors can look forward to seeing the CENTERWAVE 6000, which measures the diameter and wall thickness of pipes and tubes during extrusion 在SIKORA展位，来访者可以详细了解用于产品质量控制 的创新型测量设备。 At the SIKORA booth, visitors can nd out about the innovative measuring devices for quality control