Extrusion International USA 4-2019

PREVIEW 64 Extrusion International 4/2019 At this year’s K, ST BlowMoulding addresses with two innovative technologies companies from the industrial packaging sector as well as the manufacturers of 3D suction blow molding parts and conventional techni- cal blow molding parts. The company will be presenting the ECT 880 CoEx3 blow molding machines, which can produce 3-layer plastic drums up to 220 liters. “The ma- chine, realized in cooperation with the companies AST Kunststoffverarbeitung GmbH and Willy Müller GmbH, is predestined for the production of L-ring barrels. “We are looking forward to present this as an exhibit in Düs- seldorf,” explains Jörn Schütte, Regional Sales Manager at ST BlowMoulding. Another highlight will be the new suction blow machine ASPI 200, which enables three- dimensional and two-dimensional shaping. The machine is designed for the processing of polyolefin and techno polymers. It combines a clear reduction in the proportion of mold parting and thus a mass reduction of the plastic used with savings in the plasticizing energy necessary for processing. As a special feature, ST BlowMoulding and Dr. Reinold Hagen Foundation in Bonn, a well-known training and service provider for German and interna- tional customers and institutions, offer a daily shuttle bus from the exhibition center to the Foundation, where the machine is installed, as part of their newly agreed long- term partnership. During the approximately two-hour stay in Bonn, the ASPI 200 can be visited in the Founda- tion’s technical center. Registrations are possible under: sales@st-blowmoulding.com . In addition, a short-term registration at the booths of ST BlowMoulding and the Hagen Foundation (Hall 6, Booth D76) will be possible as well. 3D-Blow molding machine and Multi-layer technology at the K ST BlowMoulding SA www.st-blowmoulding.com K 2019: Hall 14, Booth B04 The ASPI 200 is suitable for both suction blowing (3D) and conventional blowmolding (2D)