Extrusion International USA 5-2022

49 Extrusion International 5/2022 measurement. Furthermore, the X-ray units do not pose any risk to the opera- tor. The radiation output is far below the permitted legal limits and other safety aspects ensure safe use. AUREX ERS: The AUREX ERS uses the measuring technique of the Electronic Rotating Scanner (ERS) principle. With this active-passive measurement, every point of the measured object is detect- ed 100 % in longitudinal and circum - ferential direction, so that even mini- mal tolerance deviations are detected. Coextruded layers can also be de - tected as soon as they can be physi- cally resolved with ultrasound. In ad- dition to the AUREX ERS, the "Quality Check", a wall thickness error check, is optionally available. The "Quality Check" detects anomalies on the sur- face, in the material and on the inner surface of the pipe. SAVEOMAT: Gravimetric weighing is the basis for the automation of ex - trusion lines. Continuous and highly precise gravimetric weighing and level monitoring of solid and liquid materi- als, enable material savings through exact mass throughput and metre weight control. The funnel weighers are suitable for a wide range of materials and, in addi- tion to the high level of precision, also offer maximumflexibility through easy cleaning and a quick product change. They are controlled by means of an intuitive user interface. At the K show, iNOEX will be exhibiting the following indi - vidual funnel weighers: • SAVEOMAT G: Basic version of the SAVEOMAT series. These mono hopper scales are suitable for granules. • SAVEOMAT P: Funnel weigher specialised in the block- age-free feeding of powder with a maximum chalk content of up to 20 %. • SAVEOMAT HF: Dosing unit for materials with a chalk con- tent of up to 100 %. Depending on the material and require- ment, with a twin-screw or spi- ral dosing unit. • SAVEOMAT Liquid: Multicompo- nent dosing station for recipe-accurate dosing of solid and liquid components (use of silane and peroxide). iDM 4.0: Central data storage for the collection of all process and quality data of the iNOEX systems in the extru - sion line. Optimisation potentials can be identified and product-specific key figures analysed and evaluated. The software is installed as a virtual ma- chine in the customer's network, so no additional hardware is required. OPC- UA as a standardised process data in- terface transfers the data. Integration of almost all types of interfaces is pos- sible via the iDM Gateway. By using the Grafana software, iDM 4.0 enables graphs, visualisations and data evaluations, data export as .csv or .xls, live data on the database server, use as a hall monitor as well as ready- made and freely configurable dash - boards and reports for each connected system. Site-wide statistics such as overall line effectiveness and process capability and a notification function are also possible. iNOEX GmbH www.inoex.de K 2022: Hall 10, Stand C46 WARP www.brueckner.com Higher plant efficiency for sustainable film production STRETCHING THE LIMITS Hall 03, C90 19.– 26. Oct, Düsseldorf, Germany