Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

10.10.2024

Extrusion International USA 5-2024

News

News 24.02.2023

Intelligent Interface AccessLink for HiScroll® Series Pumps

Pfeiffer Vacuum is introducing its intelligent new accessory interface AccessLink, which permits the use of a wide range of optional accessories

News 24.02.2023

Made for Recycling: PVOH coated barrier OPP film

An analysis by Interseroh+ has shown that the PP film with the PVOH barrier layer (type BICOR MB866) from Jindal Films does not pose any problems for the recycling

News 24.02.2023

Avient Developed New Compounds for Photovoltaic Cables

The new ECCOH™ XL Cross-Linkable Solutions for photovoltaic cables are REACH compliant and rated for permanent outdoor use with good UV and weather resistance

News 24.02.2023

Ineos Styrolution launches bio-attributed resins into the Americas market

New Styrolux® ECO and K-Resin® ECO grades of sustainable polymers contain bio-based renewable materials

News 23.02.2023

The PLASTPOL expo is the gateway to new sales markets

The Polish expo dedicated to the plasticc processing industry has been one of the most important events of this type in Central and Eastern Europe for years

News 17.02.2023

High-performance cooling system for optimum film quality

Hosokawa Alpine has expanded its cooling system for blown film extrusion with VarDAR aftercooling

News 17.02.2023

Röhm adds two copolymer compounds to its Cyrolite® portfolio

CYROLITE® G-20 CP is a PMMA-based copolymer for extrusion of UV- Light medical applications, and CYROLITE® MD zk6 is an amorphous, impact modified thermoplastic compound

News 16.02.2023

A novel graphene nanotube concentrate from OCSiAl

The new product provides plastics with superior electrical conductivity but retains mechanical properties and has minimal impact on a high melt flow index

Articles

Preheater Range for Wire and Cable Manufacturing from Zumbach

The range is built around an innovative intelligent induction power controller, ensuring stable and linear heating of conductors.

Articles

How To Replace PFAS in Medical Technology

A team at the Fraunhofer Institute IFAM has succeeded in developing solutions that hold great promise of targeted substitution for PFAS in fields including medical engineering

Case studies

Сase studies

Sikora's X-RAY 6000 PRO for quality control by Huacheng Cable

The system allows inline measurement of wall thickness, eccentricity and diameter of up to three material layers

Сase studies

Sikora inspection and measuring systems ensure the HV and EHV cables

HV and EHV cables place the highest demands on their function and their production

Videos

Bausano Twin Screw Extruder MD 75-30 in the extrusion line

The line is equipped also with a cooling and calibration pipe tank, Digital Extruder control 4.0, degassing unit and pressure transducer

Videos

Mflow extrusion plastometer from ZwickRoell

ASTM D1238 Melt flow plastometer is designed for MVR measurements according to method A