Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

10.10.2024

Extrusion International USA 5-2024

News

News 05.07.2021

ProAmpac Acquires Ultimate Packaging

Ultimate Packaging is a pioneer in flexographic and digitally-printed flexible packaging based in the United Kingdom

News 01.07.2021

Biopolymer extrusion coating with ‘edge encapsulation’

SAM North America Uses an EDI® Feedblock from Nordson to More than Double the Line Speed in Extrusion Coating of PLA and Reduce Coat Weight by 40%

News 01.07.2021

Canadian GREENMANTRA awarded to develop recycling solution for PPE waste

The Government of Canada has awarded $300,000 CN to GREENMANTRA to develop an efficient system for recycling Personal Protective Equipment

News 30.06.2021

Schur Flexibles expands by acquiring Termoplast S.r.L.

Specialising in recyclable films, Termoplast S.r.L. is one of the pioneers of sustainable film production in Europe

News 30.06.2021

Avient Offers New Grades in High-Performance Elastomers Portfolio

Two new grades within the next-generation Barricade™ elastomers product line expand the durometer range, which now spans from 50 to 90 Shore A

News 28.06.2021

GAP R&D centre and the new Blown film line

GAP has just completed a new 27 layer Blown Film Line using the microlayer technology in their Research & Development centre in Trecate, Italy

News 24.06.2021

Covestro supplies polycarbonates and films for new mobile network

The development of 5G is increasing the demand for materials that facilitate and ensure the high transmission rates for 5G signals

News 24.06.2021

New foam closure liners from Tri-Seal

ProTecSealsTM is a new line of polypropylene (PP) foam closure liners enables up to 100% acceptance into the material recycling stream at municipal recycling facilities

Articles

Preheater Range for Wire and Cable Manufacturing from Zumbach

The range is built around an innovative intelligent induction power controller, ensuring stable and linear heating of conductors.

Articles

How To Replace PFAS in Medical Technology

A team at the Fraunhofer Institute IFAM has succeeded in developing solutions that hold great promise of targeted substitution for PFAS in fields including medical engineering

Case studies

Сase studies

Sikora's X-RAY 6000 PRO for quality control by Huacheng Cable

The system allows inline measurement of wall thickness, eccentricity and diameter of up to three material layers

Сase studies

Sikora inspection and measuring systems ensure the HV and EHV cables

HV and EHV cables place the highest demands on their function and their production

Videos

Bausano Twin Screw Extruder MD 75-30 in the extrusion line

The line is equipped also with a cooling and calibration pipe tank, Digital Extruder control 4.0, degassing unit and pressure transducer

Videos

Mflow extrusion plastometer from ZwickRoell

ASTM D1238 Melt flow plastometer is designed for MVR measurements according to method A